Home | Contact Us    
Products    
 

 

Products

Technical Data

Building Envelope

Project Portfolio

Training

News

History

 

 

 

 

 

 

PREMIUMCOAT®

PremiumCoat PremiumCoat® sustainable roofing and waterproofing system is one of the highest quality roofing and waterproofing systems available. It is made of the best raw materials to form a flexible, U.V. resistant elastomeric compound and is fully reinforced with a tough nonwoven polyester fabric which has been designed for roofing and flashing applications of all types. PremiumCoat® is easy to apply, safe to work with and requires no special equipment. When the system is properly installed, by a certified applicator, a 10 year warranty is available for specific roofing applications. The warranty can then be extended every 10 years under a proper maintenance schedule.


Advantages & Benefits
  • Sustainable roofing system that saves expensive removal and disposal cost.
  • Ultraviolet and Infrared resistant for added durability.
  • High Albedo reduces heat and lowers energy costs.
  • Resistant to acid rain and chemical pollutants, which protect roof or wall from fallout damage.
  • Won’t spread flame over noncombustible surfaces.
  • 100 % adhesion of system to substrate
  • Wide range of colors provides beautiful architectural finish.
  • Meets V.O.C. emissions regulations to eliminate facility downtime during application.
  • Nontoxic formulation is safe to install.
  • Easy application and cleanup.
  • No special equipment required to install.
  • 10-year extendable warranty available for roofs, which means system never has to be torn off.
    		•  Uses
  • Metal roof waterproofing and cooling
  • Parapet wall waterproofing
  • Low-sloped roof waterproofing
  • Flashing of all types
  • Concrete waterproofing
  • Plywood waterproofing
  • Deck waterproofing
  • Exterior wall waterproofing

    Color Chart
    Color Chart

    		•
    Before PremiumCoat Foundation Coat Finished PremiumCoat

     

    Technical Data

    Product Reinforced Acrylic Elastomeric System
    Shelf life and storage conditions 18 months if unopened and stored between 40° F (4° C) & 90° F (32° C)
    Density 12.1 lb/gal
    Application temperature min = 40° F (4° C) to 105° F (41° C) (Ambient) min =36° F (2° C) to 130° F (51° C) (Surface)
    Drying time (Touch Dry) 1-4 hours at 77° F (25° C) / 40% humidity
    Full cure 7 days
    Total thickness 40-45 mils
    Peak Tensile strength of system (ASTM D-412) 2210 psi (15.24 mPa)
    Elongation of cured system > 53%
    Water vapor permeability (ASTM D-1653) (ASTM D-6083) 3-5 perms
    Fungus resistance (ASTM-G21) No growth supported
    Algae resistance (ASTM G-29) No growth supported
    Flammability (ASTM E-108) Class A over noncombustible deck
    Salt spray test (ASTM B-117) No effects noted
    Percent solids 66.9%
    Low temperature flexibility (ASTM D-522) 180° flexibility; bend at -15°
    Wind Uplift Pressure Resistance
    Protocol (PA 114)    		 Concrete -6,098 psf (292 kPa)
    Polyisocyanurate -1,189 psf (56.9 kPa)
    Smooth surface BUR -2,261 psf (108.3 kPa)
    Granule surface Cap sheet -1,753 psf (83.9 kPa)
    Accelerated weathering (ASTM G-26) Meets PA 129 protocol for 3,600 hours.
       
       
       
       

     

     

     

     

     

     

     

     

     

     

     

    Quest Construction Products

    HYDRO-STOP IS A WORLD LEADER IN THE MANUFACTURE OF ENVIRONMENTALLY SAFE ROOFING AND WATERPROOFING SYSTEMS. HYDRO-STOP IS FORMULATED TO PROVIDE PERMANENT SOLUTIONS TO WATER INGRESS PROBLEMS THROUGHOUT THE ENTIRE BUILDING ENVELOPE.