• Flexible so it will move with cracks
• Excellent adhesion
• Ultra Violet resistant for extra durability
• Extensive color range available
• Meets V.O.C. emission regulations to eliminate facility downtime during application.
• Nontoxic formulation is safe to install
• Easy application and cleanup
• 10-year extendable warranty available on 3 coat application.

FlexCoat is available in a wide range of attractive architectural colors.

Surface Preparation:

Remove any loose or flaking particles, lubricants, dirt, mold or mildew. All existing surfaces should be power washed.

Priming:

If any surfaces exhibit chalking after they have been properly power washed, they must be primed with one coat of SureBond primer. Dry time/Approximately 4 hours.

Application:

• Apply at a rate of 180 square feet per gallon per coat.
• Allow 8 hours between coats in temperatures of 70 degrees and above. (At lower temperatures, more drying time may be needed.)
• Two coats of FlexCoat must be applied at a total coverage rate of 90 square feet per gallon to qualify for a 5-warranty.
• Three coats must be applied at a total coverage rate of 60 square feet per gallon to qualify for 10-year material warranty.
• Contact Hydro-Stop technical representative for specific warranty information.

Protect adjacent surfaces not receiving waterproofing. FlexCoat is easily cleaned with water when still wet. Dried material can be removed with a water soluble solvent.

Do not apply if ambient temperatures are expected to fall below 40 degrees, or if rain is expected before the application has time to cure.

For specific information regarding safe handling of this material please refer to the Material Safety Data Sheet (MSDS).